2013 Lexus IS 250 Check Engine Light

Certified technicians, only the experts.
Frequently Asked Questions

2013 Lexus IS 250 — Nalley Lexus Roswell

Certified pre-owned luxury sedan with a 2.5L V6 that requires premium unleaded fuel, AWD traction, and factory-trained technicians ready to preserve performance and value.

Frequently Asked Questions

What is the most common reason for check engine light on a 2013 Lexus IS 250?

  • Loose or damaged gas cap causing an EVAP system error — quick, low-cost fix and a frequent trigger.
  • Oxygen sensor or catalytic converter wear, especially with overdue maintenance; left unaddressed this can reduce fuel economy and increase emissions.
  • Ignition misfires from worn spark plugs or coils; misfires harm performance and may damage the catalytic converter if ignored.
  • Mass airflow sensor or fuel trim issues that affect drivability — timely service minimizes repair scope and cost.

What does it mean when the check engine light comes on in a 2013 Lexus IS 250?

  • It signals the vehicle’s OBD-II system detected a fault — anywhere from minor EVAP leaks to engine misfires.
  • Constant light = stored diagnostic trouble code; flashing light = active severe condition (see flashing FAQ).
  • Diagnostics at our dealership identify code specifics and recommend OEM repairs performed by factory-trained technicians.
  • If covered by warranty, repairs must be completed at a certified dealership to preserve coverage and long-term savings.

How much does a check engine light diagnostic cost for a 2013 Lexus IS 250?

  • Diagnostic fees vary by issue complexity; many diagnostics fall in a modest range and often include a thorough inspection.
  • Nalley Lexus Roswell frequently offers service specials and transparent estimates — visit /specials/service.htm for current offers.
  • Because we use OEM tools and factory-trained technicians, immediate and long-term repair costs are often lower than independent shops when factoring accuracy and warranty protection.
  • Remember: any warranty-covered repair must be completed at a certified dealership to maintain coverage and future savings.

What is the first thing to check when the check engine light comes on?

  • Check the gas cap: a loose or cracked cap is a common, simple cause and can often clear the code after tightening or replacement.
  • Confirm you used premium unleaded fuel — the 2013 Lexus IS 250 is calibrated for premium-grade fuel and poor-quality fuel can trigger issues.
  • Note changes in performance, noises, or smells; these details help technicians diagnose faster and reduce repair time and cost.
  • If the light remains, bring the vehicle to Nalley Lexus Roswell for accurate diagnostics and warranty-compliant repairs by certified staff.

How long does a check engine light service take?

  • Basic diagnostic scans often take 30–60 minutes; a full inspection to pinpoint cause may take longer depending on symptoms.
  • Simple repairs (gas cap, sensor swaps) can often be completed same-day; more involved repairs require parts and may extend service time.
  • At Nalley Lexus Roswell, factory-trained technicians, OEM parts, and streamlined workflows often speed repair time while delivering superior, warranty-backed results.
  • We provide transparent time estimates and emphasize immediate and long-term savings by preventing repeat failures that can arise from misdiagnosis.

2013 Lexus IS 250 Check Engine Light Reset

Resetting the check engine light on a 2013 Lexus IS 250 can be done with an OBD-II scanner, by disconnecting the battery, or automatically after a successful repair and drive cycle. However, clearing codes without repairing the underlying issue only hides the warning and risks repeat failures or warranty complications. Our dealership uses OEM diagnostic tools to read and clear codes correctly after repairs, ensuring the issue is resolved, the car completes required drive cycles, and warranty coverage remains intact. Choosing Nalley Lexus Roswell delivers immediate cost-savings through accurate diagnosis and long-term savings by preventing recurring problems; remember warranty-covered repairs must be completed at a certified dealership to retain coverage.

2013 Lexus IS 250 Check Engine Light Flashing

A flashing check engine light on a 2013 Lexus IS 250 indicates an active, severe condition—commonly a misfire that can damage the catalytic converter and other components if driven. When the light flashes, avoid high-load driving, stop safely, and arrange for the vehicle to be inspected immediately. At Nalley Lexus Roswell we prioritize flashing-light cases with rapid diagnostics and OEM repairs to prevent costly downstream damage. Our factory-trained technicians assess drivability, inspect ignition and fuel systems, and recommend towing when necessary. Acting quickly minimizes repair costs, preserves emissions systems, and protects long-term value; warranty-covered work must be completed at a certified dealership for full protection.

2013 Lexus IS 250 Check Engine Light Codes

Common codes for the 2013 Lexus IS 250 include EVAP leak codes (often from a loose gas cap), P030x misfire codes, oxygen sensor failures (leading to P013x), and catalyst-efficiency codes like P0420. Ignoring EVAP issues can allow fuel vapors to vent and fail emissions tests; oxygen sensor faults lower fuel economy and emissions; misfires can quickly damage the catalytic converter and cause costly replacements. Repair costs vary: gas cap or EVAP repairs are low-cost, oxygen sensors and ignition components are moderate, and catalytic converter work is more expensive. Timely diagnosis at Nalley Lexus Roswell reduces total repair expense and ensures warranty-eligible repairs are performed by certified technicians.

Ready for service or to view this vehicle? Browse our used inventory at Used Inventory, trade in at Sell Your Car Online, or check current offers on our Service Specials. Visit us at Nalley Lexus Roswell — nalleylexusroswell.com.

Service by Make

Quick Links